B-Trim700
B-Trim 700 has the capability of high speed deburring and high rigidity cutting. The cutting tool moves through simultaneous 5-axis control to approach a workpiece from any direction to remove burrs. B-Trim700 has the option to be equipped with automatic tool changer(maximum 6 cutting tools) which helps to remove burrs of various shapes generated by the casting. In addition, the travel of 700mmx700mmx600mm makes B-Trim700 one of the most appropriate deburring machine for processing large components such as transmission case and cylinder block.
■仕様 SPECIFICATION
| Model | B-Trim700 |
| Control | FANUC 31i MODEL B |
| Axis control | 5 axis control |
| Travel | X axis 700 mm |
Y axis 700 mm |
|
Z axis 600 mm |
|
A angle -140°~100° |
|
B angle -360°~360° |
|
| Feedrate | X axis 60 m / min |
Y axis 60 m / min |
|
Z axis 60 m / min |
|
A axis 30 min-1 |
|
B axis 60 min-1 |
|
| Spindle speed | Max. 20,000 rpm |
| AC spindle motor | 11 kw |
| Spindle taper | HSK-A63 |
| Jig Max activity | Φ650 Max 60 kg(work included) |
| Hydraulic tank unit | Hydraulic unused |
| Weight | 8,000 kg |
■特殊仕様 SPECIAL SPECIFICATION
| Automatic tool changer | Maximum 6 cutting tools |
| Fixture changeover device | Hoist crane |
| Tool breakage detector | Laser type |
| Chip collecting method | Chip collector, Chip conveyor |
Specifications are subject to change without prior notice.
B-Trim500
Compared with B-Trim700, B-Trim500 is designed to be a compact machine which helps to save space on the factory floor. Duplex tool holder is used to make high rigidity cutting possible.
■仕様 SPECIFICATIONS
| Model | B-Trim500 |
| Control system | FANUC 31i MODEL B |
| Axis control | 5 axis control |
| Travel | X axis 500 mm |
Y axis 500 mm |
|
A axis 500 mm |
|
A angle -100°~100° |
|
B angle -360°~360° |
|
| Feedrate | X axis 40 m / min |
Y axis 40 m / min |
|
Z axis 40 m / min |
|
A axis 30 min-1 |
|
B axis 60 min-1 |
|
| Spindle speed | Max. 15,000 rpm |
| AC spindle motor | 2.2 kw |
| Spindle taper | HSK-A50 |
| Jig Max activity | Φ600 Max 50 kg(work included) |
| Hydraulic tank unit | Hydraulic unused |
| Weight | 4,000 kg |
■特殊仕様 SPECIAL SPECIFICATION
| Automatic tool changer | Maximum 3 tools |
| Fixture changeover device | - |
| Tool breakage detector | - |
| Chip collecting method | Chip collector, Chip conveyor |
Specifications are subject to change without prior notice.
