TOP MACHINE TOOL DIV.(Rotary Milling Machine)
MACHINE TOOL DIV.

Rotary Milling Machine

This is a multi-purpose miller. You just install work pieces on the rotary table and pass the workpieces under the two spindles (one for rough cutting and the other for finishing). Because of the double-head system, rough cutting and finishing are done simultaneously, and precision parts processing can easily be done. Because instal- ling and removing the products is also carried out while the table is rotating, no time is required for it.

【RMW2A・2B・2C:860・1200】
[RMW2A・2B・2C:860・1200]
The smallest spindles with a standard cutting power of 2.2kw (3 horsepower) and a special cutting power of 3.7kw (5 horsepower). Three types of spindles are available for rotation ranges. A-type for aluminum cutting (395 to 1130 rpm), B-type for cutting steel and casting (100 to 440 rpm) and C-type (65 to 290 rpm). Two table sizes of _860 and _1200 are available.

  • SPECIFICATIONS
Model RMW2A・2B・2C860 RMW2A・2B・2C1200
Type2A Type28 Type2C Type2A Type28 Type2C
Spinodle Speed(V-pulley Change System) 395 – 1130 rpm 100 – 440 rpm(2.2kw4P) 125 – 545 rpm(3.7kw4P) 65 – 290 rpm 395 – 1130 rpm 100 – 440 rpm(2.2kw4P) 125 – 545 rpm(3.7kw4P) 65 – 290 rpm
spindle Nose Taper NT#50 NT#50
Diameter of Cutter Fitted Max.300mm Max.300mm
Turntable Diamter 860mm 1200mm
turntable Swing Diameter 950mm 1350mm
When column is backed 100 1150mm 1550mm
Hight from Floor to Table Surface 760mm 760mm
Turntable Feed 1 – 40min/rev 1 – 40min/rev
Spindle Drive Motor for Roughing & Finishing 2.2kw*(3.7kw)4P 2.2kw*(3.7kw)4P
Net Weight of Machine 3,500kg 5,000kg
*Option
【RMW5H:1200・1500・2000】
【RMW5H:1200・1500・2000】
The medium size spindles of high rigidity with a standard cutting power of 5.5kw (7 horsepower) and a special cutting power of 7.5kw (10 horsepower). The rotation of the spindle is 60 to 1040 rpm. Two table sizes of _1200 and _1500 are available.

  • SPECIFICATIONS
Model RMW5H・1200 RMW5H・1500 RMW5H – 2000
Type 5H Type 5H Type 5H
Spinodle Speed(V-pulley Change System) Max.2000 Max.2000 Max.2000
spindle Nose Taper NT#50 NT#50 NT#50
Diameter of Cutter Fitted Max.500mm Max.500mm Max.500mm
Turntable Diamter 1200mm 1500mm 2000mm
turntable Swing Diameter 1300mm 1700mm 2200mm
When column is backed 100 1500mm 1900mm 2400mm
Hight from Floor to Table Surface 760mm 760mm 760mm
Turntable Feed 1 – 40min/rev 1 – 40min/rev 1 – 40min/rev
Spindle Drive Motor for Roughing & Finishing 5.5kw*(7.5kw)6P 5.5kw*(7.5kw)6P 5.5kw*(7.5kw)6P
Net Weight of Machine 7,000kg 9,000kg 12,000kg
*Option
  • Special fixtures

    The department designs and produ- ces special fixtures in accordance with the work piece to be processed. It ensures with its own unique know- how that you will have high-preci- sion processing.

  • Natural locks

    Work piece support jacks indispens- able to high-precision facing. Single sale SAKURAI Natural Lock SAS06 Series are available.

  • Other series

    Other than the above, SIM Series (ta- ble diameters of _1200, _1500 and _2000) of table index type are avail- able. Depending upon combinations of robots, more personnel can be re- duced.